Phaetus
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Out of Stock
$45.00
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Food-level applications, suitable for 3D printing of food, biomedical, and etc.
Works well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
Basic 3D printing nozzle for printing PLA, ABS, TPU, PA, PP, PC, ASA, Nylon, PETG, PVA, HIPS.
Compatible with all filaments PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composites with abrasive additives.
Dragonfly BMS ST Black (Dragonfly BMS ST Black)
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Out of Stock
$45.00
Harden Steel Nozzle V2 (Harden Steel Nozzle)
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
DRAGONFLY HIC HF (DRAGONFLY HIC HF)
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Stainless Steel Nozzle (Stainless Steel Nozzle)
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high precision printing in biomedical industry.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high precision printing in biomedical industry.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Superior quality SUS316 guarantees the safety and reliability of the application.
Food-level applications, suitable for 3D printing of food, biomedical, and etc.
Copper Plated Nozzle (Copper Plated Nozzle )
Temperature resistance up to 500℃, High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
Temperature resistance up to 500℃, High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, enhanced higher smoothness and less adhesion.
Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Works well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
Harden Steel Nozzle (Harden Steel Nozzle)
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
Brass Nozzle (Brass Nozzle)
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
Tip size from 0.1~1.0 mm, for 1.75/3.00 filament; Compatible with most of 3D printers on the market.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole; Lasting gloss for a long time without oxidation.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
First-class quality brass material ensures the stability of properties.
Basic 3D printing nozzle for printing PLA, ABS, TPU, PA, PP, PC, ASA, Nylon, PETG, PVA, HIPS.
Ruby Nozzle 2 (Ruby Nozzle 2)
Ruby structure optimized | Materials feed inlet adopts 60° conical angle structure, which optimizes the flow of materials and eliminates the phenomenon of nozzle plug.
DLC coated | The nozzle is wholly DLC nano-coated, and the friction coefficient of material hole inner wall is 0.03, which greatly reduces the problem of sticking materials on nozzle head in the printing process.
Composite structure | Combined structure is adopted for ruby and nozzle body to eliminate leakage caused by falling off or shifting of the ruby and improve the reliability of printing.
Hardened steel material | Hardened steel with hardness of HRC60 or above, wear-resistant and high-temperature resistant, is the preferred material for users who want to print high-strength materials.
Compatible with all filaments PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composites with abrasive additives.
- 1