All Products

Sort By:  
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Out of Stock
$45.00
EASY PLA is a basic material for 3D printing
$30.00
All you need for sure adhesion of Nylon based filament 3D prints
$24.99
CarbonX™ PP+CF is a PP copolymer and reinforced carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
$78.00
ezPC+CF is easy to print Polycarbonate with reinforced high-modulus carbon fiber. This material offers excellent printability, high thermal properties, strength & stiffness, superior dimensional stability, and an amazing surface finish.
Out of Stock
$88.00
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
$15.00
CarbonX™ PETG+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
$58.00
CarbonX™ ABS+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
$58.00
CarbonX™ PA6+CF [Gen3] is go-to material for industrial applications that require superior thermal, mechanical, and chemical resistance properties while retaining the ease of printing that you’ve come to expect.
$58.00
Dragonfly BMS ST Black (Dragonfly BMS ST Black)





Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Out of Stock
$45.00
Fiberlogy EASY PLA (EASY PLA)

EASY PLA is a basic material for 3D printing. The filament is quite durable. Its properties enable printing very precise and complicated elements.
EASY PLA may be used for creating functional prototypes, gadgets, toys and decorations. The ease of printing should satisfy hobbyist’s and professional users.

 

 

Properties:

  • Easy to Print.
  • Excellent adhesion layers.
  • Printing temperature: 200°C — 220°C
  • Bed temperature: 50°C — 70°C (when using plates or other means to increase the adhesion, the heating of the bed is not required)
  • Diameter tolerance: /- 0.02 mm
  • Oval tolerance: 0.01 mm
  • Net weight: 85 kg

 

See download tab for TDS

 

Looking for a color that is not listed? Feel free to reach out at sales@aero3ds.com

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality,
it is necessary to choose the appropriate settings for a specific printer and printing conditions.



Nozzle Temperature 200-230°C
Bed Temperature 50-70°C
Closed Chamber not required
Fan 75-100%
Flow Rate 90-100%
Printing Speed < 100 mm/s
Surface glass, masking tape
Retraction (direct) 2-3 mm
Retraction (bowden) 4-6 mm
Retraction Speed 20-45 mm/s
Drying Conditions 50°C / 4hrs



EASY PLA is a basic material for 3D printing
$30.00
Magigoo PA (Original PA)

Magigoo PA

 

WHAT: MAGIGOO PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

 

WHY:

PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA6,6 and PA6, sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibres. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.

 

Nylon filaments prove to be challenging materials for FDM printing due to their lower adhesion to conventional 3D-printing build surfaces and their higher tendency to warp. Furthermore there are several classes of PA filaments each behaving differently. MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which was developed to work with a wide number of PA types

 

HOW:

MAGIGOO PA has been designed and tested to work with different PA and fiber reinforced filament brands.

  • Shake the bottle.
  • Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
  • Print according to the filament/printer manufacturers recommendations
  • Allow to cool and Remove. The print should pop right off
  • Clean - Use a damp cloth to wipe off.

 

SAFETY:

Using this product with other than PA type filaments might cause over adhesion and damage your build surface.

 

Tips:

For larger prints a 20 mm brim is recommended

In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier

All you need for sure adhesion of Nylon based filament 3D prints
$24.99
CARBONX™ PP-CF (CARBONX PP-CF )

CarbonX™ Carbon Fiber Reinforced Polypropylene (PP+CF) 3D Filament

CarbonX™ PP+CF is made using a specialty formulated polypropylene copolymer reinforced with high-modulus chopped carbon fiber. This filament is based on a patent-pending formulation that offers improved thermal properties and low shrinkage/warp compared to competitive PP-based compounds.

The reels contain 750g of filament, but based on the very low density of PP+CF, this is the same amount of filament that would typically be found on a 1kg reel of ABS. This allows you to print light-weight and exceptionally rigid parts for medical, drones, watercraft, automotive, or any application which would benefit from a light weight, stiff, chemically resistant material.>

Benefits of PP+CF Include:

  •  Excellent resistance against a huge variety of chemicals
  •  Low density and weight
  •  Easier to print than most flexible materials and suitable for use with practically any 3D printer
  •  Typically does not absorb moisture, no drying required!
  •  High strength and stiffness

Chemical Resistance of PP+CF

 Since properties can change depending on print environment and 3D model geometry and/or surface area, it is always required to do your own testing, but Polypropylene is famous for its chemical resistances to a huge range of environments including:

  •  Acids: Acetic, Boric, Hydrochloric, Phosphoric, Stearic, Sulfuric, Uric
  •  Bases: Hydrocides of Ammonium, Barium, Calcium, Magnesium, Potassium, Sodium
  •  Solvents: Acetone, Ethanol, MEK, Phenol (10%), Water

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

  • Extruder: 220-250°C
  • Bed Temp: 23-60°C
  • Nozzle: We highly recommend a hardened steel nozzle with a minimum diameter of 0.4mm
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments
  • Bed Prep: Magigoo Bed Prep gives us the best results
  • Heated Chamber: Not required
  • Drying Instructions: 4+ Hours at 65°C



CarbonX™ PP+CF is a PP copolymer and reinforced carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
$78.00
CARBONX ezPC+CF (CARBONX ezPC+CF)

CarbonX™ ezPC+CF Carbon Fiber Reinforced Polycarbonate

CarbonX™ ezPC+CF is a high-performance carbon fiber reinforced polycarbonate filament.   This all-new material material is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability. ezPC+CF is a clear choice for engineering-grade projects that require excellent performance and ease of printability.

Benefits of CarbonX ezPC+CF Include:

  • High thermal properties, especially when reinforced with carbon fiber
  • Amorphous structure gives it low, near isotropic shrinkage (very low CTE)
  • Further improved stiffness and dimensional stability with the addition of carbon fiber reinforcement
  • Very low odor emitted while printing
  • Wide processing range of 260-280°C (suitable for most desktop printers)

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

  • Extruder: 260-280°C
  • Bed Temp: 80-100°C
  • Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
  • Bed Prep: Magigoo Bed Prep Adhesive
  • Heated Chamber: Recommended
  • Drying Instructions: 80°C for 4+ hours.


ezPC+CF is easy to print Polycarbonate with reinforced high-modulus carbon fiber. This material offers excellent printability, high thermal properties, strength & stiffness, superior dimensional stability, and an amazing surface finish.
Out of Stock
$88.00
Harden Steel Nozzle V2 (Harden Steel Nozzle)
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.

Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.

Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.

Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.

Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.

High quality imported die steel material ensures the stability of performance.
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
$15.00
CARBONX PETG+CF (CARBONX PETG+CF)

CarbonX™ PETG+CF Carbon Fiber Reinforced Co-Polyester

CarbonX™ PETG+CF is made in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). CarbonX™ PETG+CF is an improved CF reinforced 3D printing filament vs. the competition. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.

Chemical Resistance of PETG:

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.

Filament Specifications:

  • Diameter: 1.75mm
  • Diameter Tolerance: +/- 0.05mm
  • Weight: 750g

Recommended Print Settings:

  • Extruder: 230-260°C
  • Bed Temp: 70-90°C
  • Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
  • Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
  • Heated Chamber: Not required
  • Supports: Water soluble AquaTek X1 USM works great for complex parts.
  • Drying Instructions: 65°C for 4 hours.




CarbonX™ PETG+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
$58.00
CARBONX ABS+CF (CarbonX™ ABS+CF)

CarbonX™ ABS+CF Carbon Fiber Reinforced ABS

CarbonX™ ABS+CF is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.

Benefits of CarbonX ABS+CF Include:

  • Stiff, high-modulus, industrial-grade parts off many 3D printers available on the market today
  • Greatly improved stiffness, modulus, and dimensional stability thanks to the addition of carbon fiber reinforcement
  • Easier to print than most industrial-grade materials
  • Parts can be smoothed with acetone vapors
  • Higher melting point than PLA or PETG

Filament Specifications:

  • Diameter: 1.75mm
  • Diameter Tolerance: +/- 0.05mm
  • Weight: 750g

Recommended Print Settings:

  • Extruder: 220-240°C
  • Bed Temp: 100-110°C
  • Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
  • Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
  • Heated Chamber: Recommended, a chamber helps reduce warping.
  • Supports: Water soluble AquaTek X1 USM works great for complex parts.
  • Drying Instructions: 80°C for 4 hours.




CarbonX™ ABS+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
$58.00
CARBONX PA6+CF GEN 3 (CARBONX PA6+CF GEN 3)

Gen 3 CarbonX™ PA6+CF Carbon Fiber Reinforced Nylon

Gen 3 CarbonX™ PA6+CF filament is formulated using a PA6 copolymer reinforced with high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing. Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.

Unparalleled rigidity gives designers the properties they need to make their 3D printed parts with less material and save weight without sacrificing stiffness.


Benefits of Nylon PA6+CF:

  • Excellent printability
  • High tensile strength and rigidity
  • Abrasion and wear resistance
  • Improved chemical resistance over traditional 3D printing materials
  • High thermal properties



ion chem resistance



Filament Specifications:

  • Diameter: 1.75mm
  • Diameter Tolerance: +/- 0.05mm
  • Weight: 500g


Recommended Print Settings:

  • Extruder: 240-270°C
  • Bed Temp: 80-110°C
  • Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
  • Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
  • Heated Chamber: Not required, but a heated chamber between 30-80°C allows for superior layer bonding and mechanical properties
  • Supports: Water soluble AquaTek X1 USM works great for complex parts.
  • Drying Instructions: 90°C for 4 hours.




CarbonX™ PA6+CF [Gen3] is go-to material for industrial applications that require superior thermal, mechanical, and chemical resistance properties while retaining the ease of printing that you’ve come to expect.
$58.00
Per Page      1 - 9 of 26