HotEnds
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Out of Stock
$77.90
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Food-level applications, suitable for 3D printing of food, biomedical, and etc.
Works well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
Harden Steel Nozzle V2 (Harden Steel Nozzle)
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.
Dragon Hotend ST Voron Edition (Dragon Hotend ST Voron Edition)
Dragon hotend is the updated 3D printing hotend launched by Phaetus. It adopts full metal kit, the overall high temperature resistance is up to 500℃,
inner hole of the heat break is smooth and the movement resistance is small. Therefore, the filaments effectively melt and smoothly outflow without accumulation,
blocking and other problems, to achieve a better 3D printing effect.
- Heat break with an ultra-thin wall thickness as thin as 0.1mm, realizing an excellent thermal insulation.
- Increased rigid support structure guarantee the heat break remaining intact under the impact of external force.
- Integral frame rigid structure makes nozzle replacement more convenient without grasping the heat block.
- The inner hole roughness of nozzle and heat break Ra0.3, which allow a more smoother movement of filament, resulting a higher resolution prints.
- Standard hotend and high flow hotend have the same overall dimension, which realize a zero barrier for interchangeability.
- The hotend is mainly composed of copper alloy material, which has the advantage of faster heating and better heat dissipation.
- Standard all metal kit, with overall high temperature resistance up to 500 ℃.
- Flexible combined structure design makes a strong compatibility.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Dragon Hotend ST (Dragon Hotend ST)
Dragon hotend is the updated 3D printing hotend launched by Phaetus. It adopts full metal kit, the overall high temperature resistance is up to 500℃,
inner hole of the heat break is smooth and the movement resistance is small. Therefore, the filaments effectively melt and smoothly outflow without accumulation,
blocking and other problems, to achieve a better 3D printing effect.
- Heat break with an ultra-thin wall thickness as thin as 0.1mm, realizing an excellent thermal insulation.
- Increased rigid support structure guarantee the heat break remaining intact under the impact of external force.
- Integral frame rigid structure makes nozzle replacement more convenient without grasping the heat block.
- The inner hole roughness of nozzle and heat break Ra0.3, which allow a more smoother movement of filament, resulting a higher resolution prints.
- Standard hotend and high flow hotend have the same overall dimension, which realize a zero barrier for interchangeability.
- The hotend is mainly composed of copper alloy material, which has the advantage of faster heating and better heat dissipation.
- Standard all metal kit, with overall high temperature resistance up to 500 ℃.
- Flexible combined structure design makes a strong compatibility.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Out of Stock
$77.90
DRAGONFLY HIC HF (DRAGONFLY HIC HF)
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Dragon Hotend HF (Dragon Hotend HF)
Dragon hotend is the updated 3D printing hotend launched by Phaetus. It adopts full metal kit, the overall high temperature resistance is up to 500℃,
inner hole of the heat break is smooth and the movement resistance is small. Therefore, the filaments effectively melt and smoothly outflow without accumulation,
blocking and other problems, to achieve a better 3D printing effect.
- Heat break with an ultra-thin wall thickness as thin as 0.1mm, realizing an excellent thermal insulation.
- Increased rigid support structure guarantee the heat break remaining intact under the impact of external force.
- Integral frame rigid structure makes nozzle replacement more convenient without grasping the heat block.
- The inner hole roughness of nozzle and heat break Ra0.3, which allow a more smoother movement of filament, resulting a higher resolution prints.
- Standard hotend and high flow hotend have the same overall dimension, which realize a zero barrier for interchangeability.
- The hotend is mainly composed of copper alloy material, which has the advantage of faster heating and better heat dissipation.
- Standard all metal kit, with overall high temperature resistance up to 500 ℃.
- Flexible combined structure design makes a strong compatibility.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Dragon Hotend HF Voron Edition (Dragon Hotend HF Voron Edition)
Dragon hotend is the updated 3D printing hotend launched by Phaetus. It adopts full metal kit, the overall high temperature resistance is up to 500℃,
inner hole of the heat break is smooth and the movement resistance is small. Therefore, the filaments effectively melt and smoothly outflow without accumulation,
blocking and other problems, to achieve a better 3D printing effect.
- Heat break with an ultra-thin wall thickness as thin as 0.1mm, realizing an excellent thermal insulation.
- Increased rigid support structure guarantee the heat break remaining intact under the impact of external force.
- Integral frame rigid structure makes nozzle replacement more convenient without grasping the heat block.
- The inner hole roughness of nozzle and heat break Ra0.3, which allow a more smoother movement of filament, resulting a higher resolution prints.
- Standard hotend and high flow hotend have the same overall dimension, which realize a zero barrier for interchangeability.
- The hotend is mainly composed of copper alloy material, which has the advantage of faster heating and better heat dissipation.
- Standard all metal kit, with overall high temperature resistance up to 500 ℃.
- Flexible combined structure design makes a strong compatibility.
Compatible with all filaments, PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composite materials containing abrasive additives.
Stainless Steel Nozzle (Stainless Steel Nozzle)
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high precision printing in biomedical industry.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high precision printing in biomedical industry.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Superior quality SUS316 guarantees the safety and reliability of the application.
Food-level applications, suitable for 3D printing of food, biomedical, and etc.
Copper Plated Nozzle (Copper Plated Nozzle )
Temperature resistance up to 500℃, High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
Temperature resistance up to 500℃, High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, enhanced higher smoothness and less adhesion.
Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Works well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
Harden Steel Nozzle (Harden Steel Nozzle)
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Wear-resistance, High temperature performance, suitable for composites with abrasive additives as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent.