Fiberlogy ASA

Fiberlogy ASA is often referred to as the successor to ABS. Due to its exceptional resistance to UV radiation, high temperatures and humidity.
38.01€
Qty:
Add to Cart
Print

Fiberlogy ASA is often referred to as the successor to ABS. Due to its exceptional resistance to UV radiation, high temperatures (up to 94°C) and humidity, it is perfect for printing models exposed to long-term weather conditions. At the same time, the material is very durable and simple to print.

Because ASA is characterized by low shrinkage, high adhesion and less emission of unpleasant odors compared to ABS, it can be used in printers that are not fitted with a heated chamber.

 

Properties:

  • UV Resistant.
  • High Durability
  • Colors will not fade over time.
  • Can be smoothed chemically.
  • Low odor emission during printing.
  • Printing temperature: 255°C — 270°C
  • Bed temperature: 90 - 110°C
  • Diameter tolerance: +/- 0.02 mm
  • Oval tolerance: +0.01 mm
  • Net weight: 0.75 kg

 

 See download tab for TDS


Looking for colors that are not listed? Feel free to reach out at sales@aero3ds.com


How to print.

The following parameters are only suggested print settings for this material. To ensure the best print quality,
it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature 255-270°C
Bed Temperature 90-110°C
Closed Chamber not required
Fan 0-25%
Flow Rate 90-100%
Printing Speed < 100 mm/s
Surface glass, kapton tape, ABS juice
Retraction (direct) 1-2 mm
Retraction (bowden) 4-6 mm
Retraction Speed 20-45 mm/s
Drying Conditions 80°C / 4h
Notes When printing without a heated chamber, it is recommended to avoid
 exposing the model to gusts of wind/drafts.


  • Availability: 7 In Stock
  • Model: ASA
  • Brand: Fiberlogy

Write Review

Note: Do not use HTML in the text.