CARBONX PETG+CF

CarbonX™ PETG+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
54.43€
Qty:

CarbonX™ PETG+CF Carbon Fiber Reinforced Co-Polyester

CarbonX™ PETG+CF is made in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). CarbonX™ PETG+CF is an improved CF reinforced 3D printing filament vs. the competition. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.

Chemical Resistance of PETG:

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.

Filament Specifications:

  • Diameter: 1.75mm
  • Diameter Tolerance: +/- 0.05mm
  • Weight: 750g

Recommended Print Settings:

  • Extruder: 230-260°C
  • Bed Temp: 70-90°C
  • Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
  • Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
  • Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
  • Heated Chamber: Not required
  • Supports: Water soluble AquaTek X1 USM works great for complex parts.
  • Drying Instructions: 65°C for 4 hours.




  • Availability: 4 In Stock
  • Model: CARBONX PETG+CF
  • Brand: 3DXTECH

Write Review

Note: Do not use HTML in the text.