3DXTECH
CarbonX™ PP+CF is a PP copolymer and reinforced carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
ezPC+CF is easy to print Polycarbonate with reinforced high-modulus carbon fiber. This material offers excellent printability, high thermal properties, strength & stiffness, superior dimensional stability, and an amazing surface finish.
Out of Stock
$88.00
CarbonX™ PETG+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
CarbonX™ ABS+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
CarbonX™ PA6+CF [Gen3] is go-to material for industrial applications that require superior thermal, mechanical, and chemical resistance properties while retaining the ease of printing that you’ve come to expect.
PP+GF30 is a 30% glass fiber reinforced polypropylene copolymer. PP+GF30 is ideal when you need improved strength, stiffness, impact, dimensional stability, chemical resistance and high thermal properties
CARBONX™ PP-CF (CARBONX PP-CF )
CarbonX™ Carbon Fiber Reinforced Polypropylene (PP+CF) 3D Filament
CarbonX™ PP+CF is made using a specialty formulated polypropylene copolymer reinforced with high-modulus chopped carbon fiber. This filament is based on a patent-pending formulation that offers improved thermal properties and low shrinkage/warp compared to competitive PP-based compounds.
The reels contain 750g of filament, but based on the very low density of PP+CF, this is the same amount of filament that would typically be found on a 1kg reel of ABS. This allows you to print light-weight and exceptionally rigid parts for medical, drones, watercraft, automotive, or any application which would benefit from a light weight, stiff, chemically resistant material.>
Benefits of PP+CF Include:
- Excellent resistance against a huge variety of chemicals
- Low density and weight
- Easier to print than most flexible materials and suitable for use with practically any 3D printer
- Typically does not absorb moisture, no drying required!
- High strength and stiffness
Chemical Resistance of PP+CF
Since properties can change depending on print environment and 3D model geometry and/or surface area, it is always required to do your own testing, but Polypropylene is famous for its chemical resistances to a huge range of environments including:
- Acids: Acetic, Boric, Hydrochloric, Phosphoric, Stearic, Sulfuric, Uric
- Bases: Hydrocides of Ammonium, Barium, Calcium, Magnesium, Potassium, Sodium
- Solvents: Acetone, Ethanol, MEK, Phenol (10%), Water
Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
Recommended Print Settings:
- Extruder: 220-250°C
- Bed Temp: 23-60°C
- Nozzle: We highly recommend a hardened steel nozzle with a minimum diameter of 0.4mm
- Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments
- Bed Prep: Magigoo Bed Prep gives us the best results
- Heated Chamber: Not required
- Drying Instructions: 4+ Hours at 65°C
CarbonX™ PP+CF is a PP copolymer and reinforced carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
CARBONX ezPC+CF (CARBONX ezPC+CF)
CarbonX™ ezPC+CF Carbon Fiber Reinforced Polycarbonate
CarbonX™ ezPC+CF is a high-performance carbon fiber reinforced polycarbonate filament. This all-new material material is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability. ezPC+CF is a clear choice for engineering-grade projects that require excellent performance and ease of printability.
Benefits of CarbonX™ ezPC+CF Include:
- High thermal properties, especially when reinforced with carbon fiber
- Amorphous structure gives it low, near isotropic shrinkage (very low CTE)
- Further improved stiffness and dimensional stability with the addition of carbon fiber reinforcement
- Very low odor emitted while printing
- Wide processing range of 260-280°C (suitable for most desktop printers)
Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
Recommended Print Settings:
- Extruder: 260-280°C
- Bed Temp: 80-100°C
- Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
- Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
- Bed Prep: Magigoo Bed Prep Adhesive
- Heated Chamber: Recommended
- Drying Instructions: 80°C for 4+ hours.
ezPC+CF is easy to print Polycarbonate with reinforced high-modulus carbon fiber. This material offers excellent printability, high thermal properties, strength & stiffness, superior dimensional stability, and an amazing surface finish.
Out of Stock
$88.00
CARBONX PETG+CF (CARBONX PETG+CF)
CarbonX™ PETG+CF Carbon Fiber Reinforced Co-Polyester
CarbonX™ PETG+CF is made in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). CarbonX™ PETG+CF is an improved CF reinforced 3D printing filament vs. the competition. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.
Chemical Resistance of PETG:
Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.
Filament Specifications:
- Diameter: 1.75mm
- Diameter Tolerance: +/- 0.05mm
- Weight: 750g
Recommended Print Settings:
- Extruder: 230-260°C
- Bed Temp: 70-90°C
- Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
- Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
- Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
- Heated Chamber: Not required
- Supports: Water soluble AquaTek X1 USM works great for complex parts.
- Drying Instructions: 65°C for 4 hours.
CarbonX™ PETG+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
CARBONX ABS+CF (CarbonX™ ABS+CF)
CarbonX™ ABS+CF Carbon Fiber Reinforced ABS
CarbonX™ ABS+CF is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.
Benefits of CarbonX™ ABS+CF Include:
- Stiff, high-modulus, industrial-grade parts off many 3D printers available on the market today
- Greatly improved stiffness, modulus, and dimensional stability thanks to the addition of carbon fiber reinforcement
- Easier to print than most industrial-grade materials
- Parts can be smoothed with acetone vapors
- Higher melting point than PLA or PETG
Filament Specifications:
- Diameter: 1.75mm
- Diameter Tolerance: +/- 0.05mm
- Weight: 750g
Recommended Print Settings:
- Extruder: 220-240°C
- Bed Temp: 100-110°C
- Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm.
- Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
- Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
- Heated Chamber: Recommended, a chamber helps reduce warping.
- Supports: Water soluble AquaTek X1 USM works great for complex parts.
- Drying Instructions: 80°C for 4 hours.
CarbonX™ ABS+CF offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.
CARBONX PA6+CF GEN 3 (CARBONX PA6+CF GEN 3)
Gen 3 CarbonX™ PA6+CF Carbon Fiber Reinforced Nylon
Gen 3 CarbonX™ PA6+CF filament is formulated using a PA6 copolymer reinforced with high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing. Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.
Unparalleled rigidity gives designers the properties they need to make their 3D printed parts with less material and save weight without sacrificing stiffness.
Benefits of Nylon PA6+CF:
- Excellent printability
- High tensile strength and rigidity
- Abrasion and wear resistance
- Improved chemical resistance over traditional 3D printing materials
- High thermal properties
Filament Specifications:
- Diameter: 1.75mm
- Diameter Tolerance: +/- 0.05mm
- Weight: 500g
Recommended Print Settings:
- Extruder: 240-270°C
- Bed Temp: 80-110°C
- Nozzle: We currently recommend a hardened steel nozzle with a minimum diameter of 0.4mm
- Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
- Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
- Heated Chamber: Not required, but a heated chamber between 30-80°C allows for superior layer bonding and mechanical properties
- Supports: Water soluble AquaTek X1 USM works great for complex parts.
- Drying Instructions: 90°C for 4 hours.
CarbonX™ PA6+CF [Gen3] is go-to material for industrial applications that require superior thermal, mechanical, and chemical resistance properties while retaining the ease of printing that you’ve come to expect.
FibreX PP-GF30 (CARBONX PP-GF30 )
FibreX™ PP+GF30 [Polypropylene] 3D Printing Filament
FibreX™ PP+GF30 is made using a specialty formulated 30% glass fiber reinforced polypropylene copolymer which we created specifically for 3D printing. Our formulation offers improved thermal properties and lower shrinkage & warp compared to competitive PP-based compounds.
Reinforcing this trusted engineering polymer with glass fiber really made it a game changer for industrial applications. 3D printed PP+GF30 parts can be found in a wide array of real-world functional end uses or prototypes with automotive, tooling fixtures and jigs, appliances, and sporting goods. >
Benefits of PP+GF Include:
- Excellent resistance against a huge variety of chemicals
- Low density and weight
- Low shrinkage and warping
- Typically does not absorb moisture, no drying required!
- High strength, stiffness, and impact resistance
Chemical Resistance of PP+GF
Since properties can change depending on print environment and 3D model geometry and/or surface area, it is always required to do your own testing, but Polypropylene is famous for its chemical resistances to a huge range of environments including:
- Acids: Acetic, Boric, Hydrochloric, Phosphoric, Stearic, Sulfuric, Uric
- Bases: Hydrocides of Ammonium, Barium, Calcium, Magnesium, Potassium, Sodium
- Solvents: Acetone, Ethanol, MEK, Phenol (10%), Water
Filament Specifications:
Diameter: 1.75mm +/- 0.05mm
Weight: 500g
Recommended Print Settings:
- Extruder: 240-270°C
- Bed Temp: 80-110°C
- Nozzle: We highly recommend a hardened steel nozzle with a minimum diameter of 0.4mm for abrasive materials such as this
- Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with abrasive filaments
- Bed Prep: Magigoo Bed Prep gives us the best results
- Heated Chamber: Not required
- Drying Instructions: 4+ Hours at 65°C
PP+GF30 is a 30% glass fiber reinforced polypropylene copolymer. PP+GF30 is ideal when you need improved strength, stiffness, impact, dimensional stability, chemical resistance and high thermal properties
- 1