With PET-G properties, you can make prototypes that are more functional and end-use parts. This is possible thanks to its rigidity, which is better than that of ABS. Thanks to glycol compound, the material is more durable and less susceptible to shrinkage. Chemical resistance to acids, salts, and alkaline substances also widen the spectrum of its applications.
The translucent and non-translucent color options available allow to create amazing prints for different purposes. This material may be used for electronics, prototyping, and decorations.
Properties:
- High durability.
- Low shrinkage.
- Resistant to acids, salts and alkali substances.
- Printing temperature: 230°C — 250°C
- Bed temperature: 90°C
- Diameter tolerance: +/- 0.02 mm
- Oval tolerance: +0.01 mm
- Net weight: 0.85 kg.
See download tab for TDS
Looking for a color that is not listed? Feel free to reach out at sales@aero3ds.com
How to print.
The following parameters are only suggested print settings for this material. To ensure the best print quality,
it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature | 230-250°C |
Bed Temperature | 90°C |
Closed Chamber | not required |
Fan | 0-25% |
Flow Rate | 95-105% |
Printing Speed | 35-60 mm/s |
Surface | masking tape |
Retraction (direct) | 2-3 mm |
Retraction (bowden) | 3-5 mm |
Retraction Speed | 20-45 mm/s |
Drying Conditions | 60°C / 4h |
Notes | Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape. |